Hydraulic Bus bar Cutting Tools for Metal Sheet Cutting Up to 12mm
Application
This processor is suitable for making large electric cabinet ,power
distribution cabinets ,switch cabinets and power transmission and
distribution construction engineering construction site use.
Tools Introduction
Hydraulic Bus bar Cutting Tools for Metal Sheet Cutting Up to 12mm is a remote control tools, works with an external hydraulic pump
(capable of providing 700Bar working pressure). CWC-200 is intended
to be used to cut Cu/Al busbar, it's cutting capacity is 200mm*12mm
(Width*Thickness). With the help of hydraulic power and sharp
cutting blade, quick and clean cutting can be achieved. Cutting
surface is smooth, without burr.
Characteristic
The unilateral type structure, cutting in larger power, but it does
not waste materials.
The blade adopts alloy tool steel forging fine grinding, the
incision is neat, no burr and no deformation.
During cutting, the copper and aluminum row should not be fixed,
any position is OK.
The pressing device is equipped with the blade side in order to
prevent the tilt of copper and aluminum row.
It can use with pump CFP-800-1,CP-700,EHP-70ZS,EHP--63A.
Specifications
1. Suittable for pinching holes onLandHshape iron
plate,copper&aluminum busbars
2. Flat pedestal to provide steadiness in operation.
3. Punch dies made of high carbon tungesten steel and not easy
towear off.
4. Easy to carry and simple to operate.
Description and function
1. manual hand pump operated, for copper pipe, steel tube, plastic
water pipe
- It is suit for common water pipe, wire pipe, carbon steel pipe,
conduit tube, bending the angle 90
- The upper plate of the new design is cut by one time, it won’t be
broken.
This machine could bend pipes toward any direction you want;the
largest bending angle is 90°
2. Suitable for use in bending brass pipes,steel pipes,hydraulic
pipes,coated and uncoated pipes.
3. We can make moulds in other specifications according to
customers requirements
Features
Remote Control Style: An external hydraulic pump is required
(Capable of providing 700Bar working pressure). Foot hand and
electric hydraulic pumps are all available in our products range
Sharp Cutting Blade: Ensure fast and clean cutting
Cutting Surface: Smooth, without burr
Portable: Can be fixed or taken to working place according to
specific application
Steel Case Package: For easy carrying and protect tools well
Technical Data
| Product No. | Model Type | Output (KN) | Operating stroke(mm) | Cutting Rangemm(mm) | Weight(kg) |
| 80109 | CWC-150 | 230 | 50 | ≤150*12 | 20 |
| 80110 | CWC-200 | 270 | 70 | ≤200*12 | 27 |
Detail Picture
